Are you looking for the easiest tricks to clean your kitchen faucet? We are gonna teach you tricks about how to clean kitchen faucets using simple ways. Kitchen is the most important area and is most used. So kitchen faucets may often get dirty. Even microbial build up can be found. If the sink faucet is clean, it shines bright in the light and the kitchen looks classy. So Kitchen faucets should be kept clean and for this you need to clean it whenever it gets grimy.
Kitchen faucet should be cleaned regularly because it doesn’t remain neat and clean much longer. If you do not clean it from time to time, then the dirt and stains will return and microbial build up can grow. This build up can create stains on the surface and bad odor. To learn how to clean kitchen faucets, read this article till the end.
Do The Basic Cleaning
To clean the kitchen faucet, you may use many types of cleaner. Sometimes the water flow may decrease if there is any build up or minerals clogged inside the filter. Firstly you may start with the basic cleaning. To do so, follow this steps :
1. Wash Mild Spots With Water
You can clean tender spots easily without using any cleaner. Use a wet cloth to rub the outside area of the faucet. Tender spots will go away easily by this rubbing. After that you need to wipe off the faucet with dry clothes.
2. Try a Natural Cleaner to Clean Heavy Spots
You need to rub the natural cleaner with a wet piece of cloth. This will remove heavy spots from the faucet. To learn How to clean kitchen faucets, you must follow the basic steps first. To Make a natural cleaner, you need to mix the white vinegar with the same amount Of water. Before applying you need to know the metal of the fixture. Don’t apply this mixture on iron. Firstly, apply a drop of mixture on a small portion of the faucet to check if it is a good choice to apply or not. You can also apply the cleaners of Formula 409 instead of the mixture.
3. Sterilize Your Faucet With Bleach or Vinegar
To sterilize the faucet, You can use bleach Or vinegar. Firstly you need a wet tatter of cloth. Avoid using scrubber or sponge as they may carry a lot of germs. To use bleach, you need to mix a quarter amount Of water with a tablespoon Of bleach. Mix that properly and apply it on a small portion of the faucet to check. After that you can decide to apply the mixture. Put gloves on your hand before applying so that the bleach can not do any harm to your skin.
To use vinegar, first Of all you need to mix white vinegar with water. You have to mix white vinegar with the same amount of water. You can’t use vinegar on iron. So try the mixture in a small portion of the faucet to avoid further complications.
Both bleach and vinegar are effective to sterilize your faucet. As bacteria and other microbial activity can grow anytime, so you need to protect your faucet by disinfecting with these sterilizers.
4. Wipe Off The Faucet With a Dry Rag
After using the faucet area Or after cleaning, you need to wipe off the faucet with a dry and clean rag. Make sure that there should be no watermark left in the faucet after wiping off. If you don’t dry off the faucet, then germs and minerals can pile up and it will be tough to remove the build up later. So always keep the faucet area dry. If you are Trying to Learn How to Clean a kitchen faucet, keep a note that you should never forget to dry off your kitchen faucet.
5. Know The Finish And Fixture of Your Faucet
To clean your kitchen faucet, you need to be aware of the fixture type and finish. It is important to know because if you try to clean the faucet without knowing the finish, then the faucet can get scratched or many other complications may arise. Every type of finish is not comfortable to clean. Moreover you need to use the perfect tool/brush to clean the faucet. Once you know the finish, then you can buy the tool you need. You need to know the fixture of the kitchen faucet as well. Because when you try to clean the faucet with cleaners, many cleaners can spoil the fixture if you don’t know about the fixture. You can’t apply some chemicals in every metal. So if you know the metal and all information about the fixture, then you can apply the perfect mixture and can easily clean your faucet.
Erase Pile Up of The Grimy Germs And Minerals
Some build up are so stubborn that they are hard to erase. There are some easy tricks given below to remove stubborn build up:
1. Remove stubborn Build up with Baking Soda
Use a tablespoon Of baking soda and mix it with a little amount Of water.Make a paste and Scrub this mixture on the spot with a soft bristled toothbrush.Then Wash it with cold water.After that dry Off the faucet with a dry rag.
2. Erase Greenish Accumulations with Ammonia
Take a little amount of ammonia and mix it up with the same amount of water.Wear hand gloves before applying the mixture. Use a wet piece of cloth and rub the mixture on the greenish or bluish green build up. After erasing the build up, wash the area with water.Turn the tap on for 4-5 seconds to remove excess ammonia if any drop is left around there.Then dry off the area with dry and clean rag. Don’t forget to wear gloves and keep in mind that you should rub gently so that no scratches are found in the faucet.
3. Apply Lemon juice on Brown or Reddish Accumulations
Brown or reddish accumulation grows due to iron rust.These build ups can be erased by acidic scrubber.Lemon is a effective source of acid.Mix lemon juice with borax and apply this paste on the accumulation with a piece of cloth.After rubbing, wash the area with water properly.Then dry off the faucet area with dry and clean cloth.
4. Remove scum of the froth of soap and Bad Water Marks
To remove this build up and bad stubborn water marks, you need to use white vinegar. Mix a little amount of baking soda with vinegar and make a paste. Apply this paste over the water marks and spots. Leave it for 5 minute. Then wash it with cold water. After that dry it off properly. Do you wanna know more about how to Clean the kitchen faucet?
5. Erase Black and Darker Accumulation with Tartar
Black and darker build ups are stubborn spots. You have to mix tartar cream with hydrogen peroxide. Then make a paste and apply it on that spot with a wet piece of cloth. Rub it properly until the spot is erased. Then Rinse it with water and dry off with a dry rag.
6. Use CLR to Remove Other spots
Sometimes calcium or lime spots seem stubborn one as they are hard to clean. To remove such spots, you may use CLR. It is a strong cleaner. You can use this CLR in multipurpose and it cleans many kinds of spots such as calcium spots, lime spots, rust, bad watermarks etc. Before using CLR, wear hand gloves. Then rub a small amount of CLR on the spot with a wet rag. You don’t need too much of it as it is one of the strong cleaners. After rubbing, wash the area and dry off with a dry and clean rag.
See more: Parini stainless steel cookware
Increase Water Pressure
If build up or minerals are clogged inside, then water pressure may decrease. Cleaning the filter can be the solution. After unclogging the filter and spout of the faucet, the water flow will improve. As you are learning how to clean kitchen faucets, this simple ideas will help you a lot to clean. Follow this steps to unclog the filter and increase water flow:
1. Unscrew the Filter with Channel lock wrench
First of all wrap it with a piece of cloth so that the wrench can not create any scratches in it. Then fix a channel lock wrench in the wrapped filter and twist it anti clockwise and when it is loosened, remove it with your hand.
2. Take Apart the Pieces of the Filter
A filter may have several parts. You need to Disassemble those parts first. But before doing this, you have to notice how the parts are assembled together. Because after cleaning you need to assemble them again in this order before attaching with the base.
3. Unclog The Filter with a Brush
After removing the parts of the filter from one another, take the main cylindrical part which is actually the filter. Then run water through it. You need to wash it With warm water. After that take a soft bristled new toothbrush to clean it. Use a needle or pin to unsating the small holes of the filter. Rub the brush until it gets unclogged properly. After that, Wash it with cold water.
4. Erase Calcium and microbial build up by boiling
Boil white vinegar and put the filter in the hot boiled vinegar. Leave it for 45 minutes and then Wash it very well with cold water. While cleaning, rub the filter so that the build up is removed. Calcium will also be removed by this process.
5. Reattach the Filter with the Base
Before reattachment with the base, you need to connect the parts of the filter as it was before. Check the joints properly. Then twist the filter clockwise with the base of the faucet with your hands. Once it gets tightened, twist it clockwise with the channel locking wrench. Now turn on the tap and check the difference of the water flow.
Disinfect and Clean the Spout of the Faucet
Spout of the faucet is an essential part. It should be kept clean. To disinfect and clean the stains of the spout of the mill, you should follow the steps that are given below:
1. With Vinegar
To do this step, you need some vinegar, water, a baggy and a rubber band. First of all, put the same amount of water and vinegar in the baggy. Then put the spout area of the faucet inside the baggy so that it can be submerged by the liquid. After that attach the baggy with the spout with a rubber band. Leave it overnight. After that remove the baggy, clean the spout area with a new toothbrush and turn on the tap so that the junks are washed away with the running water. After 5 minute, turn off the tap.
2. With Baking soda
Mix baking soda, white vinegar and water together and put the mixture in a baggy. Now put the spout of the faucet in it and tie the baggy with a rubber band with it. Leave it overnight. After that use a toothbrush to clean the spout area and turn on the tap for 5 minute. After washing, turn off the tap.
3. With Lemon
Cut a lemon in half and put it toward the spout and cover it with a baggy and tie the baggy with a rubber band. Leave it for 2 hour and remove the lemon. Then wash the whole area gently.
Remember one thing that, after washing the faucet area you need to dry off the faucet.
Try to Use Faucets with Antimicrobial Protection
If you are planning for a new home, buy faucets which are manufactured with antimicrobial protection. If you can install such a faucet in your kitchen, then your mill area will remain hygienic and microbial organisms will not grow in the surface or filter area. As you have already read the process about how to clean kitchen faucets, you may install faucets with antimicrobial protection.
Conclusion
Hope this text has furnished you with proper ways about the way to smooth kitchen faucets. By adopting these tricks you may without problems easy your faucet. Moreover you can give ideas about a way to smooth kitchen taps to different human beings. Tricks and simple thoughts can make your lifestyles greater clean. To analyze greater hints, you can observe our articles. So did you like the article? Don’t overlook to comment underneath. Have a pleasing day!
