Last weekend, I made a mango smoothie in my Ninja Blast portable blender. It was sweet, cold, and perfect. Later, I noticed a faint sour smell from the cup. That’s when I knew — cleaning is just as important as blending. Over time, I’ve learned simple steps to keep it fresh, safe, and long-lasting. I’ve tested many blenders, even the best blender under $50, and one rule stays the same: clean it right, and it works better. Today, I’ll show you how to clean Ninja Blast portable blender in a quick, easy, and proven way.
Why Proper Cleaning Matters
A clean blender keeps every drink tasting fresh. No odd smell. No old bits stuck inside. Just pure flavor in every sip.
Leftover food can grow bacteria fast. That’s bad for taste and health. A quick wash makes it safe and ready for the next blend.
Good care also helps last longer. Blades stay sharp, seals stay tight, and the motor runs well. Even the best blender under $50 can give years of service with the right cleaning habits.
Tools and Materials You’ll Need
You only need a few items to keep spotless. Most are already in your kitchen.
- Warm water – Loosens food and makes washing easier.
- Mild dish soap – Cuts grease without harming parts.
- Soft sponge or bottle brush – Cleans the cup without scratches.
- Small cleaning brush – Reaches tight spots around the blades.
These tools make cleaning fast and safe. With them, your blender stays fresh, looks new, and works better for longer.
Step 1 – Rinse Right After Use
Fill the cup halfway with warm water. Add a drop of mild soap. Put the lid on and blend for 20 seconds. This clears most food bits fast.
Step 2 – Disassemble the Parts
Take off the lid, remove the cup, and carefully detach the blades. Check your manual to see if any parts are safe for the dishwasher.
Step 3 – Wash the Cup
Use a soft sponge or bottle brush with warm, soapy water. Avoid rough scrubbers that can scratch the cup’s surface.
Step 4 – Clean the Blades
Be careful with the sharp blades. Use a small brush or toothbrush to clean around the edges and hard-to-reach spots.
Step 5 – Wash the Lid and Seal
If you can, take off the silicone seal. Rinse inside the lid and the seal well. Remove any trapped food bits to avoid odours.
Step 6 – Rinse Thoroughly
Rinse all parts under clean water. Make sure no soap remains, as this can change the taste of your drinks.
Step 7 – Dry and Store
Use a clean towel to dry all parts. Let them air-dry completely before putting the blender back together. This keeps it fresh and mold-free.
Deep Cleaning Routine (Weekly or After Sticky Recipes)
Sometimes, a quick wash isn’t enough. For a deep clean, soak the blender parts in warm, soapy water. Let them sit for 10 minutes. This helps loosen stubborn food.
To remove smells, mix one part white vinegar with three parts water. Blend this mix for 20 seconds, then rinse well. Vinegar clears odors without harsh chemicals.
Don’t forget the silicone seal. Take it off if you can. Clean it carefully to remove trapped bits. This keeps your blender fresh and working well for years.
Expert Tips for Easier Cleaning
Between smoothie batches, blend plain water for 20 seconds. This quick rinse keeps the blades clean and cuts down on deep cleaning time.
Store with the lid off. This lets air flow inside and stops smells from building up.
Avoid overfilling the cup. Too much liquid can spill and cause sticky messes that are harder to clean.
Common Cleaning Mistakes to Avoid
Waiting too long before rinsing makes food dry and hard to clean. Quick rinses save time and effort.
Using boiling water on plastic parts can warp or damage them. Warm water is safer and works well.
Skipping the seal means leftover food can hide and cause bad smells. Always clean under and around the seal carefully.
Relying only on the dishwasher may harm parts over time. Hand washing keeps your blender safer and lasting longer.
How to Keep Your Ninja Blast Fresh While Traveling
Take a small bottle of dish soap with you on trips. It makes cleaning easy no matter where you are.
Rinse your blender right after use, even when travelling. This stops food from drying and keeps fresh and ready for the next blend.
Why the Ninja Blast Is Worth the Care
The Ninja Blast is small, affordable, and works for many recipes. It’s perfect for quick smoothies and snacks.
Taking good care keeps it working well for years. Clean parts blend better and last longer.
Final Thoughts
Cleaning portable blender is simple. Rinse soon after use, wash all parts well, and dry fully. A deeper clean once a week keeps it fresh and working strong.
Make cleaning a quick daily habit. It takes minutes but saves you time and trouble later.
